How to Wax your Lower Legs at Home?
Lorem ipsum dolor sit amet, consectetur adipiscing elit.
Carefully read instructions and contraindications before waxing STEP 1 - MEASURE
Refer to our fabulous Beads Measuring Chart. Easy to follow, simply use the large and small cups to measure the amount of wax beads you will need.
For the lower legs, pour 3 large cup-fulls of Happy Waxing Beads into your empty pink tin.
Place the tin into the heater. Never pour the wax directly into the wax warmer, always use your pink tin.
STEP 2 - HEAT
HEAT
Plug in your Happy Waxing heater, place the lid on and flip on the switch. The wax will take approximately 20-30 minutes to melt.
Plug in your Happy Waxing heater, place the lid on and flip on the switch. The wax will take approximately 20-30 minutes to melt.
STIR THE WAX
To ensure even heat and achieve a creamy texture, occasionally stir the wax with a wooden spatula. You may notice the heaters red light will turn on and off. This is normal and is maintaining the temperature of the heater.
The heater will only be warm to the touch-but the tin itself can become hot.
To ensure even heat and achieve a creamy texture, occasionally stir the wax with a wooden spatula. You may notice the heaters red light will turn on and off. This is normal and is maintaining the temperature of the heater.
The heater will only be warm to the touch-but the tin itself can become hot.
HEAT TEST
Before waxing, apply a small amount of wax to your inner wrist using the spatula.
If the wax is too warm, switch off the heater and allow it to cool for a few minutes. Then turn the heater back on and re-test for comfort.
Before waxing, apply a small amount of wax to your inner wrist using the spatula.
If the wax is too warm, switch off the heater and allow it to cool for a few minutes. Then turn the heater back on and re-test for comfort.
STEP 3 - CLEAN & PREPARE & WAX
CLEAN
When waxing the lower legs, sit on on a flat, stable surface that has been prepared with your no-mess protective sheet. Using a tissue or cotton, cleanse the area to be waxed with the Happy Waxing Clean Purifying Lotion. Notice the direction of hair growth.
When waxing the lower legs, sit on on a flat, stable surface that has been prepared with your no-mess protective sheet. Using a tissue or cotton, cleanse the area to be waxed with the Happy Waxing Clean Purifying Lotion. Notice the direction of hair growth.
Tip
For best results, be sure the hair is at least 1/8" long.
For best results, be sure the hair is at least 1/8" long.
PREPARE
Prepare the skin by applying just a tiny drop of Happy Waxing Prepare Nourishing Oil.
Prepare the skin by applying just a tiny drop of Happy Waxing Prepare Nourishing Oil.
WAXING THE LOWER LEGS IN 3 SECTIONS
Front of the leg: Apply the wax down towards the ankle
Back inside: Bend your leg on the knee of the opposite leg. Apply wax diagonally, from side to side.
Back outside: Stretch your leg outwards. Apply the wax diagonally, starting from the side towards the back of your leg.
Front of the leg: Apply the wax down towards the ankle
Back inside: Bend your leg on the knee of the opposite leg. Apply wax diagonally, from side to side.
Back outside: Stretch your leg outwards. Apply the wax diagonally, starting from the side towards the back of your leg.
DIP THE SPATULA
Dip the spatula into the wax, wipe the underside of the spatula against the inner edge of the tin to remove excess wax. Roll and turn the spatula a few times to disconnect the wax and to prevent dripping.
Dip the spatula into the wax, wipe the underside of the spatula against the inner edge of the tin to remove excess wax. Roll and turn the spatula a few times to disconnect the wax and to prevent dripping.
FRONT OF LEG
Apply a small amount of Happy Waxing wax in a smooth continuous motion in the direction of the hair growth. Do not apply the wax too thick, it will take longer to dry. Make the edges of the wax thicker to avoid wax residue during removal. If the edge is too thin, apply a new layer of wax over to remove easily.
Apply a small amount of Happy Waxing wax in a smooth continuous motion in the direction of the hair growth. Do not apply the wax too thick, it will take longer to dry. Make the edges of the wax thicker to avoid wax residue during removal. If the edge is too thin, apply a new layer of wax over to remove easily.
NO STRIPS NEEDED!
Allow the wax to harden for a few seconds. Touch the wax to make sure it is dry and ready for removal.
Hold your skin taut with one hand which will make the removal much more comfortable. With the other hand, lift the edge of the wax, staying parallel to the skin remove in a quick swift movement in the opposite direction of the hair growth.
Allow the wax to harden for a few seconds. Touch the wax to make sure it is dry and ready for removal.
Hold your skin taut with one hand which will make the removal much more comfortable. With the other hand, lift the edge of the wax, staying parallel to the skin remove in a quick swift movement in the opposite direction of the hair growth.
BACK OF THE LEGS
Bend your leg on the knee of the opposite leg.
Apply wax diagonally, from side to side. Remove the wax, staying parallel to the skin, in the opposite direction of the hair growth.
Bend your leg on the knee of the opposite leg.
Apply wax diagonally, from side to side. Remove the wax, staying parallel to the skin, in the opposite direction of the hair growth.
BACK OUTSIDE
To complete the hair removal, stretch your leg outwards.
Apply the wax diagonally, starting from the side towards the back of your leg. Remove the wax in the same way, always parallel to the skin, in a quick swift motion.
To complete the hair removal, stretch your leg outwards.
Apply the wax diagonally, starting from the side towards the back of your leg. Remove the wax in the same way, always parallel to the skin, in a quick swift motion.
CLEAN
After waxing, apply Happy Waxing® Clean Purifying Lotion.
After waxing, apply Happy Waxing® Clean Purifying Lotion.
CLEAN
Apply a drop of Happy Waxing® Prepare Nourishing Oil and massage into skin to soothe and remove any wax residue.
Apply a drop of Happy Waxing® Prepare Nourishing Oil and massage into skin to soothe and remove any wax residue.
YOU DID IT
Congratulations! Flip off the switch and unplug your Happy Waxing heater.
Congratulations! Flip off the switch and unplug your Happy Waxing heater.
Allow time for the wax to harden
There is no need to clean out the tin. Your tin is ready for its next use! Simply add the Easy-To-Fill and Refill Happy Waxing Beads!
Store your Happy Waxing Heater with its lid on to protect your wax.
There is no need to clean out the tin. Your tin is ready for its next use! Simply add the Easy-To-Fill and Refill Happy Waxing Beads!
Store your Happy Waxing Heater with its lid on to protect your wax.
OUR TIP
Should wax drip on your heater, the Happy Waxing Nourishing Oil can be used to wipe it clean. Be sure to wipe down the heater as the oil can make it slippery!
Should wax drip on your heater, the Happy Waxing Nourishing Oil can be used to wipe it clean. Be sure to wipe down the heater as the oil can make it slippery!